8-Inch 4H-SiC Wafer
200 mm-class SiC substrates place additional emphasis on surface, TTV, bow/warp and lot-to-lot repeatability during equipment qualification. Contact WEGITEK with your required specifications, quantity and drawings for a technical quotation.
8-Inch 4H-SiC Wafer: Material Overview
8-Inch 4H-SiC Wafer is considered for power electronics, RF and device research, epitaxy development and semiconductor equipment process qualification. Silicon carbide is a wide-bandgap semiconductor valued for its combination of high breakdown field, thermal conductivity and operation in demanding device environments. Confirm 4H polytype, Si/C face, off-axis specification and whether the purchase is for device fabrication, R&D or equipment evaluation.
200 mm-class SiC substrates place additional emphasis on surface, TTV, bow/warp and lot-to-lot repeatability during equipment qualification.
Engineering and Specification Considerations
Crystal quality, conductivity and edge requirements should be stated on the RFQ.
- Diameter
- thickness and tolerance
- 4H/6H polytype
- Si-face/C-face
- off-axis angle
- doping
- grade
- polish
- defect limits
Quality and Inspection Priorities
Engineering acceptance should be defined before order confirmation. Depending on grade and use, the inspection review may include:
- Polytype verification
- crystal orientation
- conductivity type
- resistivity
- micropipe / dislocation metrics
- TTV
- bow
- warp
- edge condition and surface defects
Where possible, request the inspection method, measurement location and batch documentation alongside the numeric limit.
Applications and Selection Guidance
Potential application fields include power electronics, RF and device research, epitaxy development and semiconductor equipment process qualification. The final selection depends on thermal, electrical, optical and mechanical operating conditions. Share the process step and acceptance criteria to help the supplier evaluate feasibility.
Frequently Asked Question
What distinguishes a device-grade SiC wafer from a dummy or test-grade wafer?
The relevant acceptance criteria can include crystallographic quality, defect density, resistivity, surface preparation and the inspection method. A grade label alone is not a substitute for a signed specification.
What should be included in a request for quotation?
Send the part name or drawing, material grade, diameter/size, thickness, orientation, surface finish, quantity and required tests. If you have a target delivery date or acceptance specification, include it at the outset.
Specification status: Product descriptions are reference information, not a published stock or performance guarantee. Final specifications, manufacturing options, price and delivery require written confirmation.